PEEK application in petrochemical industry

(1) Continuous carbon fiber CF / PEEK composite pipe:
◆ 67% longer service life than steel pipe ◆ 65% lighter than metal pipe
◆ It is more resistant to corrosion by hydrogen sulfide and carbon dioxide than steel pipes
◆ Long-term use in methanol and 160 ℃
◆ Smooth and corrosion-resistant guarantee excellent fluidity
◆ Replace corrosion-resistant alloys often used in the oil field and energy industry to replace pipeline systems.
(2) PEEK applied to sealing: reliable sealing solution
◆ In seawater, hydrocarbon, and 100% hydrogen sulfide gas environment, the strength retention rate reaches 100% after 1000 hours of high temperature at 175 ℃
◆ Double the compression resistance than PTFE
◆ 300 times higher creep resistance than PTFE
◆ 18 times higher compression resistance than PTFE
◆ Replaces metal springs, reduces the risk caused by seal wear and contact with the well wall (energy-absorbing spring)
In some industries, including the oil and gas industry, the main use of គ្រឿងម៉ាស៊ីន PEEK is to provide mechanical support for softer sealing materials, such as elastomers and fluoropolymers, while in other industries, the properties of this material make it Ideal as a main seal.
(3) Application of PEEK in ESP electric submersible pump
◆ Excellent high temperature resistance, excellent insulation even at 250 ℃
◆ High mechanical strength even at 250 ℃
◆ Long term at 200 ℃ high temperature and 140MPa high pressure, it still maintains high reliability
◆ Excellent high temperature resistance and excellent insulation, even at 250 ℃, it still maintains high mechanical strength.
(4) Application of PEEK logging instrument: excellent abrasion resistance and insulation
◆ Long term at 200 ℃ high temperature and 140MPa high pressure, it still maintains high reliability
◆ The insulator can be used for a long time without being corroded in the high temperature and strong acid medium (H2S, SO2) in the well.
◆ It has a unique comprehensive performance, which has abrasion resistance, chemical resistance, mechanical strength, and stable electrical performance over its entire operating temperature range. This helps to maintain the integrity of the collected data, while bringing Less interference.
(5) PEEK wire and cable application: excellent high insulation performance
◆ Lower water absorption and better toughness than polyimide (PI)
◆ Excellent resistance to cutting and corrosion to ensure zero electrical short circuit
◆ Stable chemical corrosion resistance at 200 ℃ and 100MHz environment ◆ Permeability resistance
◆ No need to dip insulation paint like PI winding wire, reduce cost
(6) PEEK connector application: improve the overall performance of downhole ឧបករណ៍ភ្ជាប់
◆ Longer life than glass-ceramic connectors
◆ Two times higher power transmission capacity than glass-ceramic connectors
◆ Excellent insulation performance to ensure no leakage
◆ Excellent resistance under corrosive liquid and gas environment
◆ With high purity and strength, PEEK polymer can allow thinner thin-walled sections to be designed in more compact connectors, which can have excellent performance even in small spaces.
◆ Can withstand the typical oil and gas industry fluids, including seawater, mineral oil and silicone oil, as well as hydraulic fluids, but also suitable for hydrogen sulfide (H2S) acid gas wells. The performance of PEEK is much higher than the NORSOK M-710 standard, which is an important specification for the oil and gas industry.
(7) The ESP electric submersible pump uses four parts: PEEK insulation ring, insulated wire, thrust wear-resistant block and front and rear plug.
(8) PEEK សន្ទះបិទបើក seat, thrust washer and សន្ទះបិទបើក stem wear-resistant sleeve are used on the សន្ទះបិទបើក
(9) Used on chemical pumps: magnetic pump isolation sleeves, នៅក្បែរs and lock nuts, blades of vane pumps.
(10) For compressors: piston rings, support rings, valve discs, bacterial valve caps and support pads.

ភ្ជាប់ទៅអត្ថបទនេះ។ ការដាក់ពាក្យស្នើសុំនៅក្នុងឧស្សាហកម្មគីមីវិទ្យា

សេចក្តីថ្លែងការណ៍បោះពុម្ពឡើងវិញ៖ ប្រសិនបើគ្មានការណែនាំពិសេសទេអត្ថបទទាំងអស់នៅលើគេហទំព័រនេះគឺដើម។ សូមបង្ហាញប្រភពសម្រាប់ការបោះពុម្ពឡើងវិញ៖ https://www.cncmachiningptj.com/，thanks

ភី។ អេជ។ ភីផ្តល់ជូននូវជួរពេញលេញនៃភាពជាក់លាក់ផ្ទាល់ខ្លួន ម៉ាស៊ីននៅប្រទេសចិន services.ISO 9001: 2015 និង AS-9100 បានបញ្ជាក់។ ភាពជាក់លាក់រហ័ស ៣, ៤ និង ៥ អ័ក្ស ម៉ាស៊ីន CNC សេវាកម្មរួមមានការកិនការងាកទៅរកអតិថិជនជាក់លាក់សមត្ថភាពផ្នែកដែកនិងផ្លាស្ទិចដែលមាន +/- ០.០០៥ ម។ ម។ អ។ស្លាប់ដេញ,សន្លឹកដែក និង ត្រា។ ការតំឡើងគំរូដើមការដំណើរការផលិតកម្មពេញលេញការគាំទ្រផ្នែកបច្ចេកទេសនិងការត្រួតពិនិត្យពេញលេញ រថយន្ត, អាកាស, ផ្សិតនិងឧបករណ៍, ដឹកនាំពន្លឺ,ផ្នែកវេជ្ជសាស្រ្តកង់និងអ្នកប្រើប្រាស់ អេឡិចត្រូនិ ឧស្សាហកម្ម។ ចែកចាយឱ្យទាន់ពេលវេលាសូមប្រាប់យើងបន្តិចអំពីថវិកាគំរោងនិងពេលវេលាចែកចាយរំពឹងទុក។ យើងនឹងធ្វើយុទ្ធសាស្រ្តជាមួយអ្នកដើម្បីផ្តល់នូវសេវាកម្មដែលមានប្រសិទ្ធិភាពចំណាយខ្ពស់បំផុតដើម្បីជួយអ្នកឱ្យឈានដល់គោលដៅរបស់អ្នកសូមស្វាគមន៍មកកាន់ពួកយើង ( sales@pintejin.com ) ដោយផ្ទាល់សម្រាប់គម្រោងថ្មីរបស់អ្នក។